RESTRICTED AREA • Select your country
×

DIGITAL, a new era:
Hail to the bits!


Single pair, two twisted pairs and multipair cables. The cables have been designed in accordance with the standard AES/EBU specification on the management of digital equipment.

Syntax®, no compromise

  • Digital multipair

    7YDPR...SX

    The SYNTAX DIGITAL MULTIPAIR cables are developed for those applications (either in fixed installations or outdoors) where the management of digital equipment are a very important part of the whole system. The cables have been designed in accordance with the standard AES/EBU specifications, 110 ohm impedance and a very low capacitance thanks to the use of a special gas injected foam for the conductors’ insulation. The particular internal arrangement solves the problems of twisting and knotting of the cores while keeping the right flexibility. The pairs are twisted and individually shielded by aluminium foil with drain wire. The external jacket of each pair is individually numbered. The overall external jacket is made with a high tech PVC polymer, very flexible and impact absorbing, slipping over rough surfaces and granting suppleness even with low temperatures. Photo : 7YDPR04SX

    Photo
    1
    • Conductors: tinned OFC 24 AWG - 28 x 0.10 mm
      Conductors jacket: white/blue gas injected foam - Ř 1,4 mm
      Drain wire: tinned OFC 24 AWG - 7 x 0.18 mm
      Screen: aluminium / mylar foil 100% coverage
      Operating temperature: -30° +70° C
      Pair jacket: Black PVC flame-retardant Ř=3.4 mm
      Nominal Impedence: 1-4 Mhz 110 Ω/100 mt
      D.C.R. conductors: <86 Ω/Km
      D.C.R. shield: <70 Ω/Km
      Capacitance cond./cond.: 1Khz 37 nF/Km
      Capacitance cond./shield: 1Khz 57 nF/Km

      Overall jacket: matt Black super flexible PVC flame-retardant
        Pair N. Part N. Ř Cable
      2 7YDPR02SX  9,6 mm
      4 7YDPR04SX 11,2 mm
      8 7YDPR08SX 14,8 mm
      12 7YDPR12SX 17,4 mm
      16 7YDPR16SX 19,5 mm
       
      Recommended for

      SYNTAX® SVK-SVS connectors series

      SYNTAX® SHD connectors series

      SYNTAX® Speaker 19 pin connector

    More info
  • Digital AES/EBU installation

    7XDCBL02SX

    The SYNTAX Digital Installation cable represents the best solution for the internal wiring of racks and digital equipment installations.
    The cables have been designed in accordance with the standard AES/EBU specifications, 110 ohm impedance and a very low capacitance thanks to the use of a special gas injected foam for the conductors’ insulation. The pairs are made up of tinned OFC conductors, twisted and shielded by aluminium foil with drain wire,providing 100% protection from external noises.
     

    Photo
    1
    • Conductors: tinned OFC 24 AWG 28 x 0.10 mm
      Conductors jacket: white/blue gas injected foam - Ř 1,4 mm
      Drain wire: tinned OFC 24 AWG - 7 x 0.18 mm
      Screen: aluminium/mylar foil 100% coverage
      Nominal Impedence: 1-4 Mhz 110 Ω/100 mt
       
        D.C.R. conductors: <86 Ω/Km
        D.C.R. shield: <70 Ω/Km
        Capacitance cond./cond.: 1Khz 37 nF/Km
        Capacitance cond./shield: 1Khz 57 nF/Km
        Operating temperature: -30° +70° C
        Jacket: Black PVC flame-retardant Ř=3.4 mm

    More info
  • Two pairs digital

    7XDDS07SX

    The SYNTAX®  two twisted pairs digital cable is manufactured with reliably consistent impedance and features a special polymer sheath for low capacitance. The shield is made up of two different screens: the first is a high-density spiral tinned copper, the second is a aluminium/polyester foil.
    The drain wire between the two screens makes connection easier. The second pair may be used for the feedback signal on digital data lines.
    The external jacket is black PVC flame-retardant, trampling-proof, impact absorbing, water-proof and flexible for longer lifespan.
     

    Photo
    1
    • Conductors: tinned OFC 24 AWG 19 x 0,12 mm
      Conductors jacket: 1 - red/blue Foam - Skin Ř 1,4 mm
      Conductors jacket: 2 - red/white Foam - Skin Ř 1,4 mm
      Drain wire: tinned OFC 24 AWG 19 x 0,12 mm
      Screen 1: high density spiral tinned OFC 95% coverage
      Screen 2: aluminium / polyester foil 100% coverage
      Operating temperature: -30° +70° C.
      External jacket: black PVC Ř 7,2 mm flame-retardant
      D.C.R. conductors: <90 Ω/Km
      D.C.R. shield: <25 Ω/Km
      Nom. impedence: 1-4 Mhz 110 Ω
      Capacitance cond./cond.: 1Khz 40 nF/Km
      Capacitance cond./shield: 1Khz 80 nF/Km
        

    More info
  • Single pair digital

    7XDDS03SXN - 7XDDS03SX

    SYNTAX® single pair DIGITAL AES/EBU-DMX CABLE, (standard AES/EBU and DMX use specifications) is manufactured with reliably consistent impedance and features a special polymer sheath for low capacitance. To ensure a high protection level from EMI/RFI noise, the shield is made up of two different screens:
    ● the first is a high-density spiral tinned copper; ● the second is a aluminium/polyester foil.
    The drain wire between the two screens makes connection easier. Black or Blue PVC flame-retardant external jacket, trampling-proof, impact absorbing and flexible for longer lifespan.
    Furter model is the halogen free 7XDDHF03SX for installation use with external dark green jacket LSZH

    Photo
    1
    • Conductors: tinned OFC 24 AWG - 19x0,12 mm
      Conductors jacket: red/blue Foam Skin Ř 1,4 mm
      Drain wire: tinned OFC 24 AWG - 19x0,12 mm
      Screen 1: high density spiral tinned OFC 95% cov.
      Screen 2: aluminium/polyester foil 100% cov.
      Operating temperature: -30° +70° C.
      External jacket: PVC Ř 5,5 mm flame-retardant, Blue (7XDDS03SX), Black (7XDDS03SXN)
      D.C.R. conductors: <90 Ω/Km
      D.C.R. shield: <40 Ω/Km
      Capacitance cond./cond.: 1Khz 40 nF/Km
      Capacitance cond./shield: 1Khz 80 nF/Km
      Nominal Impedence: 1-4 Mhz 110 Ω/100 mt

    More info
  • Ethernet

    7XLANCAT5 - 7XLANCAT5PUR

    SYNTAX® offers a cable with high intrinsic quality, excellent flexibility and robustness to tackle the difficult jobs in the entertainment world, ensuring reliable performance in critical conditions.
    With the great spread of the Internet, this kind of cables, widely used in the computer world, are produced on a large scale to drive down prices, often at the expense of transmission quality and manageability. The Syntax CAT5E cable is designed for use in broadcasting and in all the network installations for transmission of high Class D bit-rates; it is compliant with ISO/IEC 11801 - EN 50173 - EIA/TIA 568B.2, ensuring accurate transmission of data up to 90 meter cable length.
    To maintain the correct data transfer along the entire length, it is very important that the body of the cable is not deformed by an alteration in the internal position of the four twisted pairs. In this regards, the use of a particular foamy compound keeps the twisted pairs fixed and properly spaced. Moreover, the presence of two shields (one in aluminium foil and the other in tinned copper braid) guarantees a 100% protection from external noise. The version PUR up-jacketed has been particularly designed for heavy outdoor application, for use on cable drum, for mobile transmission vehicles and wherever a high abrasion resistance and continuous bending cycles are needed, preserving an enduring transmission quality. When using this version, the second jacket should be removed near the RJ45 connector, in order to get the right diameter for assembling.
    Photo 1: 7XLANCAT5  - Photo 2: 7XLANCAT5PUR

    Photo
    12
    • Conductors: Solid bare OFC Ř=0,51 mm - 24 AWG
      Conductors jacket: Polyolefin Foam - Ř=0,95 mm
      Color code: green, white-green, orange, white-orange, blue, white-blue, brown, white-brown
      First screen: aluminium/mylar overlapping foil 100%
      Second screen: tinned copper braid coverage >80%
      Resistance of conductors: < 90 Ω/Km
      Insulation resistance: > 8 GΩ per Km
      Capacity between conductors: 51 nF/Km
      Impedance from 1 to 100MHz: 100 Ω
      Operating temperature: -30° +70° C

      Jacket 7XLANCAT5: PVC black flame retardant Ř=6,4 mm
      Jackets 7XLANCAT5PUR: First: PVC black flame retardant Ř=6,4 mm
                                                   Second: Polyurethane compound black Ř=7,7 mm

        Frequency (MHz) 1 4 10 16 20 31.25 62.50 100
        Attenuation (dB/100m) 2.0 3.8 6.1 7.5 8.6 10.7 15.6 19.9
        Next (dB) 66.3 57.3 51.3 48.2 46.8 43.9 39.4 36.4

    More info
  • Ethernet

    7XLANCAT6PUR

    The SYNTAX® 7XLANCAT6PUR Cat6 cable is designed for mobile use in broadcasting and in all Class E network installations with transmission frequency up to 250MHz; it is compliant with ISO/IEC 11801 - EN 50173 - EIA/TIA 568B.2 and ensures accurate transmission of data up to 90 meter cable stretches. For optimal data transfer along the entire cable, the internal position of the four twisted pairs should not be altered. In this regard, a particular foamy tape has been used to surround the twisted pairs and keep them fixed and properly spaced, thus maintaining the correct structure of the cable throughout its length. A particular method has been used for the tinned copper braid shielding between the first and the second cable sheath, greatly improving the return loss values, which are usually critical with the standard S/FTP shielding. The outer polyurethane (PUR) sheath has been particularly designed for rigorous conditions in outdoor applications, for use on cable drum, for mobile media vehicles and wherever high abrasion resistance and continuous bending cycles are needed, preserving enduring transmission quality. This version of Cat6 can be wired with standard RJ45 connectors.  In order to make the diameter right for assembling, the second jacket should be removed near the RJ45 connector.

    Photo
    1
    • Conductors: Solid bare OFC Ř=0.57 mm - 23 AWG
      Conductors jacket: Polyolefin Foam - Ř=1 mm
      Color code: green, white-green, orange, white-orange, blue, white-blue, brown, white-brown
      First Jacket: PVC black Ř=6.2 mm flame retardant
      Screen: tinned copper braid coverage >80%
      Second jacket: PUR - Polyurethane compound black Ř=8.0 mm
      Resistance of conductors: < 75 Ω/Km
      Insulation resistance: > 5 GΩ/Km
      Capacity between conductors: 48 nF/Km
      Impedance from 1 to 250MHz: 100 Ω ± 15%
      Operating temperature: -30° +70° C
       


        Frequency (MHz) 1 4 10 16 20 31.25 62.50 100 200 250
        Attenuation (dB/100m) 1.9 3.5 5.4 6.9 7.8 9.9 14.3 18.4 27.1 30.8
        Next (dB) 89.3 79.3 69.3 64.7 62.6 58.7 53.0 49.4 44.6 43.2
        Return Loss (dB/100m) 30.3 28.5 27.3 26.7 26.4 25.9 25.1 24.2 23.1 21.8

    More info

SYNTAX by VALENTINI
Via Asti 84/A - 10098 Rivoli (TO) - ITALY
TEL.+39 0119594160
FAX +39 0119594166
info@syntaxnet.it
P.IVA 02571550017

Privacy and terms of use